Adhesion primer with marble powder

From 14,90 

Includes 20% VAT
Delivery Time: immediately available

Clear
SKU: N/A Category:
  • Adhesion primer with marble powder
  • Aqueous acrylate-styrene dispersion as binder

On which substrates can this adhesion primer be used?

  • Tiles
  • Glass
  • MDF-boards
  • Metal etc.

Important: The substrate must be dry, load-bearing and free of grease, dust and oil! 3 hours before processing: stir well before processing so that as much of the marble powder as possible can be applied. The temperature must not fall below 5° C. Recommended application is done with a brush, alternatively with a roller.The adhesion primer with marble powder can be diluted with up to 10 % water on highly absorbent surfaces.

Spreadability:

1 l is sufficient for approx. 5 m²; consumption may vary depending on the structure and absorbency of the substrate!

Drying time:

Ca. 12 hours at + 20 °C

Cleaning of tools:

Clean tools immediately after use with water and soap.

WeightN/A
DimensionsN/A
Content

12l., 5l., 1l.